Measuring Instructions Inside Mount : Measure across the width of your window opening in 3 different places - top, middle and bottom. Measure should be taken within the window jamb. - Provide the smallest of these three measurements. Be exact. Comfortex will make the necessary deductions to fit the window opening. Measure the length of the window opening from the underside of the soffit to the surface of the window sill in 2 places - use the smallest of these two measurements.
Outside Mount : Measure the exact width and length of the area to be covered. On the width, allow at least 1 1/2" of an overlap on each side. An overlap of 3" on each side is recommended. No deduction. Be sure to take into consideration any obstructions such as window trim, molding, locks and window cranks.
Mounting Dimensions: - The standard 1" tube are available with 2 brackets in 1 1/2" and 2" widths. - Minimum depth for flush inside mount including installation bracket: 2 1/2"
*Different monitors show different colors. Please request and recieve free sample swatches before you order.
Polynesian Sand RedRock 92101002
Polynesian Sand Tiki Brown 92101005
SoPacStripeGldStrw 2191001
SoPacStripeCrlReef 92191002
SoPacStripeVolcStp 2191003
SoPacStripeFijiReeds 92191004
Polynesian Sand Samoan Brown 92101004
Cloth Tape
Standard Features
Polynesian Sands Fabric is made of 100% Polyester
South Pacific Fabrics is 59% Polyester, 41% Polypropylene
The Standard Roller is the traditional shade design. The fabric rolls from either the back of the roller (standard) or from the front (reverse roll) to conceal the hardware.
White Bead chain pull cord
White Clutch
Fabric wrapped with bottom rail for a tailored look
Specification
Width : 12"- 70"
Length : 12" - 120”
Options
Upgraded your headrail with Cassette Headrail Option to conceal the operating machanisms and provides coordinated look with a matching fabric insert
Motorization is available when Envision Roller Shades are paired with the Cassette Head Rail